Hot water is your best friend. Whether you’re taking a hot bath after a long day, or just need something to get rid of a tough stain, you got to love hot water. Until it starts having problems, of course. From not enough hot water to having poor energy efficiency, there’s always a problem. But before you call gas hot water repair Glebe, here are some ways you can try improving the gas water heater yourself.
Try to Lower Hot Water Temperatures
When you install your water heater, look at its temperature. Some of them have a default temperature of 140F, but they only need to be at 120 F for them to run properly. If the heater is too hot, you may have to deal with buildup, corrosion, and plus, the water can end up burning you. Sometimes, the solution is as simple as lowering the temperature.
Plus, it can help lower your bills by quite a bit, so there you go.
Drain The Tank!
Every couple of months, drain at least a quart of water. Do it until the water is clear. This can help you get rid of sediment and other buildups that can affect your hot water.
Are Your Pipes Insulated?
Look at your hot water pipes. Do they have insulation? If so, you can insulate them and this can help raise the hot water temperature without raising settings, and it can help the pipes lose heat. If you’re having problems with hot water, sometimes the solutions is insulation.
Look into how much it would cost to insulate your water pipes. Sometimes, you can do it yourself, but if your unit is complex, you may need to pay a professional. Ultimately, a pro can help you save more money and it can be a worthy investment.
Look at the Water Heater
Is your water heater insulated? If not, then this may be your problem. Some hot water tanks, particularly old tanks, may not have an R-value that’s good enough. Make sure your hot water heater is 24 or higher. If it’s not, you can insulate your tank. This can save energy, money, and prevent the hot water from losing heat. Best of all, it’s simple to do. Blankets or jackets can insulate them, and they cost nothing to do so. Insulating a water heater is little effort for a lot of value.
If you don’t have an R-value on your water tank, a good rule of thumb is to touch it. Your water tank shouldn’t feel too warm. That means that the heat is escaping. Instead, you should insulate it and then make sure that it’s not warm to touch.
Hire a Professional
There are many reasons to hire a professional over just doing it yourself. For example, if you need to paint your house, it can be a pain to paint your house on your own, and you may be looking up house painters Alfords Point in order to help you. If you tried a few solutions and they didn’t work, it would be wise to hire a professional. A hot water heater isn’t something you should spend too much time messing around with; if you do, you may end up damaging the unit or yourself. What you should do is instead talk to the pros. Glebe can look at your water heater and make sure it’s running hot water that costs less.
If you’re ready to save money and have a comfier bath, talk to Glebe today and see how they can help you. You can live better.
Click here to checkout more home improvement blog.