Glance at the Lifting Beams Advantages and Disadvantages

Lifting beams transform lifting loads into bending forces on the beam. The lifting beam has a simple and modest design consisting of a beam with a single attachment point centered on the top side of the beam for connecting to a hoist, crane, or other lifting machines. Some lifting beams may have two bails to engage two crane or hoist hooks. There are two or more evenly-spaced lifting lugs on the underside of the beam that attach to and support the load via hook or sling. This beam lift is made by numbers of Beam Lifting Equipment’s, but here we will know the advantages and disadvantages of beam lifting.

Advantages of using a lifting beam…

Lifting beams are idyllic for lighter and shorter span lifts that don’t require a lot of headroom. For the reason that there is a single bail attachment on the top for the crane to attach to, it doesn’t require the same amount of headroom that a spreader beam does. Lifting beams are perfect for situations where the overhead room is a concern as it connects to the crane or hoist using a bail attachment.

Lifting beams also offer multiple lifting points underneath and can be designed with variable or fixed lifting lugs. This form of adjustability means that lifting beams can be used in many different applications and for many different types of loads. This amendable design allows lifting beams to handle out-of-balance loads, Control inward crushing forces, Utilize special load securement attachments. You can find the number of the lift provides who provide Server Lift for Rent.

The heavy-duty design of a lifting beam is supreme for loads that are too weak or flexible to be lifted without support—such as long or thin sheets of metal or steel plates.

Let’s sum up these pros in some points

  1. Efficient use of crane height because of a lack of top rigging.
  2. Simple to build – one structural member and some lugs.
  3. Potentially weldless design.

Disadvantages of Using a Lifting Beam

Lifting beams are stiffer and more rigid, use more material, and are heavier than an equivalent spreader beam to counteract the bending forces being applied to the beam. Therefore, they don’t use material as efficiently as a spreader beam and tend to be more expensive.

Not just this, even a lightweight load that has a wide span will require a pretty significant and rigid lifting beam, so a spreader beam may be more beneficial and cost-effective in this type of instance. When using a lifting beam, a tag line may be required to keep loads level and prevent tipping or spinning of the load during the lift.

Let’s sum up these cons in some points

  1. Achieving a 20ft reach requires a 20ft beam (hard to support).
  2. The size of the beam increases dramatically with size.
  3. Expensive

Wrapping Up

Lifting beam has the potential to transmute to lifting loads into bending forces on the beam with the help of Beam Lifting Equipment. But as every product has some pros and cons lifting beam also has some advantages and disadvantages that we have shared above in this article. So, bear in mind these pros and cons of using a lifting beam while considering to opt it. We hope this blog will remove all your confusion about the lifting beam. But still, if you have any confusion, and something comes in your mind then feel free to ask us by commenting us in the comment section.

,

Leave a Reply

Your email address will not be published. Required fields are marked *